Bike Motors

	2-CYCLE, friction drive Mitsubishi 23cc 1.1 hp--23mph MSRP $339 This kit has the 7/8" OD drive roller. Rear mount Bicycle engine. 22.6 cc 1.10 hp Mitsubishi full crank 40 to 1 mix ratio, 2-cycle engine. Please be sure and click on the “Friction Drive” page to your left and read some more information. This is a complete friction drive kit that will mount to most bicycles. It includes the above engine, the housing is ¼” thick Aluminum Extrusion Channel ( not a bent thin piece of steel ) the channel is CNC machined and anodized black, we use two ball bearings to support the CNC machined case hardened - zinc plated metal drive roller, a centrifugal clutch, 60” throttle cable & lever, (Twist grip is extra) remote stop switch, engaging rod, U shaped mounting bracket plus many other small parts needed for mounting.
	4-CYCLE friction drive Honda CX35, 35 cc 1.6 hp--27mph MSRP $459 This is a complete friction drive kit that will mount to most bicycles. It includes the above engine, the housing is ¼” thick Aluminum Extrusion Channel ( not a bent thin piece of steel ) the channel is CNC machined and anodized black, we use two ball bearings to support the CNC machined case hardened - zinc plated metal drive roller, a centrifugal clutch, 60” throttle cable & lever, remote stop switch, engaging rod, U shaped mounting bracket plus many other small parts needed for mounting. Instruction included and also on the web site. Be sure and pick the size of drive roller you want. The 7/8 inch is for hills or riders over 250 lbs. The 1 inch has a good top speed and good power. (Standard size) The 1-1/8 inch is for a faster top speed and riders under 185 lbs. The 1-1/4 inch is for riders under 165 lbs.
	2-CYCLE friction drive Mitsubishi with 1.5 inch roller, 43 cc, 2.2 hp--40mph+ MSRP $469 This engine is VERY Quiet and has 37.5% MORE power then the Honda GX35 or the Robin EHO35. CARB Phase II Approved for use in California. Your choice of the 1-3/8" (still very fast and good hill climbing power) or the 1.50 inch OD Drive roller. Great Power and a fast top speed. Up to 40+ mph. The Stop switch is located on the engine. If you want a remote be sure and order the remote Stop Switch.
	2-cycle chain and grear drive Mitsubishi 43 cc, 2.2 hp --30mph MSRP $589. This engine is 37.5% more power then the Robin-Subaru and just as "quiet". Stop switch is mounted on the engine. This is a complete gear & chain drive kit. As with all the engines brands & sizes this can be put on other product - types - styles of bikes. The kit shown is the OUTSIDE Drive, our standard kit. You can also order it as a INSIDE DRIVE, these will be harder to install and they do not come with the sprocket - chain guard, you would have to make one.

These motors will all be mounted on Catrike Pockets for comparison purposes.
Installation will range from $50 for friction drive to $75 for chain and gear drive.